Utax P-C2665 MFP

Default Setting (System Menu)
8-112
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [CR Action].
4 Press the OK key.
5 Press the  or  key to select [CR Only], [LF and
CR] or [Ignore CR].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Job Name
Set whether the job name set in the printer driver is displayed.
Use the procedure below to specify a Job Name.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [Job Name].
Printer: a b
*********************
2 Color Setting
3 EcoPrint
[ Exit ]
1 Emulation Set.
CR Action: a b
*********************
2 LF and CR
3 Ignore CR
1 *CR Only
Sys. Menu/Count.: a b
7 Copy
*********************
9 Send
[ Exit ]
8 Printer
Printer: a b
*********************
2 Color Setting
3 EcoPrint
[ Exit ]
1 Emulation Set.