Utax P-C2665 MFP

Basic Operation
3-7
3
Copying
Follow the steps as below for basic copying.
Part that is operated
1 Press the Copy key when the Copy key/indicator
is off.
NOTE: If the Message Display is turned off, press the
Energy Saver key and wait for the machine to warm
up.
2 Place the originals on the platen or in the
document processor.
NOTE: For loading instructions, refer to Loading
Originals on page 2-65.
3 The paper source for copying is the location
displayed on the panel.
When you need to change the paper source, use
the Paper Selection menu. If [Auto] is selected, the
most suitable paper source is automatically
selected.
For specifying the paper source, refer to Paper
Selection on page 4-4.
Ready to copy.
Copies: 1
Letter
q sA Letter a
100%
[ Zoom ] [ Paper ]
Paper source
Paper Selection: a b
*********************
2 A A4 a Plain
3 B A5 a Plain
1 * Auto