Utax P-C2665 MFP

Default Setting (System Menu)
8-136
4 Press the OK key. The Service Setting menu
appears.
5 Press the  or  key to select [LaserScanner
Cln].
6 Press the OK key. A confirmation screen appears.
7 Press [Yes] (the Left Select key). Completed. is
displayed and the screen returns to the Service
Setting menu.
Drum Refresh (Drum refresh mode setting)
This sets the refresh mode for the drum. When the printing quality declines, refreshing the drum can restore the
printing quality.
Use the procedure below to set the drum refresh mode setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu
appears.
3 Press the  or  key to select [Service Setting].
Service Setting: a b
*********************
2 Network Status
3 Test Page
[ Exit ]
1 Service Status
Start the laser
scanner cleaning.
Are you sure?
[ Yes ] [ No ]
Sys. Menu/Count.: a b
; Document Box
< Edit Destination
*********************
[ Exit ]
= Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Backgrnd Density
[ Exit ]
1 Copy Denst. Adj.