Utax P-C2665 MFP

Sending Functions
5-27
5
Job Finish Notice
This feature sends an e-mail providing notification that transmission has been completed.
Use the procedure below to specify the Job Finish Notice settings.
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [JobFinish Notice].
5 Press the OK key. JobFinish Notice appears.
6 Press the  or  key to select [On] and then press
the OK key.
7 Press the  or  key to select [Address Book] or
[Address Entry], and then press the OK key.
8 If you select [Address Book], select [Address
Book] on the next screen and press the OK key,
and then select the notice destination.
Press [Menu] (the Right Select key), select
[Detail] on the next screen and press the OK key to
view the details of the selected notice destination.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection g
JobFinish Notice: a b
*********************
2 On
1 *Off
Destination: a b
*********************
2 Address Entry
1 *Address Book
Address Book: a b
*********************
p Maury
p Morgan
[ Menu ]
p Fiala