Sending Functions
5-26
6 Select the destination computer from the computer
list.
Press [Detail] (the Right Select key) to see the
information of the selected computer.
7 Press the OK key to confirm the destination, and
then press the Start key. Transmission starts.
NOTE: To change the destination computer, press the
Back key and then press [Yes] (the Left Select key).
This brings you back to step 6.
NOTE: To use WSD Scan from your computer, press
[From Computer] in step 5 and then scan the original
from the computer.
To Next Page
Loading...
Need help?
General
