Utax P-C2665 MFP

Sending Functions
5-20
File Name Entry
This setting allows you to assign a document name to scanned images. You can specify a default for the
document name.
Use the procedure below to assign names to scanned documents that you are sending.
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [File Name Entry].
5 Press the OK key. File Name Entry appears.
6 Enter the file name, press the OK key. Additional
Info. appears.
NOTE: Refer to Character Entry Method on
Appendix-9 for details on entering characters.
7 Enter the date, job number, etc. on the screen, and
then press the OK key.
NOTE: Refer to Character Entry Method on
Appendix-9 for details on entering characters.
Completed. is displayed and the screen returns to
the basic screen for sending.
8 Specify the destination, and press the Start key to
start sending.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection g
File Name Entry: A b
File_2010
*
S
ABC
[ Text ]