Utax P-C2665 MFP

Default Setting (System Menu)
8-65
8
4 Press the OK key. A confirmation screen appears.
5 Press [Yes] (the Left Select key). The
Formatting... screen appears and SSD formatting
begins. Once the formatting ends, the Common
Settings menu reappears.
Press [No] (the Right Select key) returns to the
Common Settings menu without formatting the
SSD.
Format SD Card
The machine is equipped with a slot for an SD card.
A new SD card must be formatted before it can be used in the machine. Formatting allows data to be written to
the SD card.
IMPORTANT: Format SD Card is only displayed when an SD card is installed in the machine and protection is
disabled.
NOTE: Formatting will destroy any existing data on a storage device including a used SD card.
Formatting of the SD card must be executed from the machine.
When a new SD card is inserted in the machine's slot, Format SD Card will appear on the message display.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [Format SD Card].
Format.
Are you sure?
z SSD
[ Yes ] [ No ]
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language