Basic Operation
3-41
3
3 Place the original on the platen or in the document
processor, and press the Start key. Transmission
starts.
Specifying Destination
When specifying destination, choose from the Address Book or use the One-touch keys.
Choosing from the Address Book
Select a destination registered in the Address Book.
1 In the basic screen for sending, press the Address
Book key. The Select Addr Book menu appears.
NOTE: If external address book is not registered, [Ext
Address Book] is not displayed.
2 Press the or key to select [Address Book] and
then press the OK key. Address Book appears.
To use an address book on the LDAP server, select
[Ext Address Book].
3 Press the or key to select the desired user or
group, and then press the OK key.
If you select a user, the list of destinations
registered to the user appears.
If you select a group, proceed to step 5.
To Next Page
Loading...
