Utax P-C2665 MFP

Default Setting (System Menu)
8-125
8
Backgrnd Density
Darkens or lightens the overall background density. Copy mode and send/document box mode can each be
adjusted to one of seven levels. Use the procedure below to specify the setting for Background Density.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu
appears.
3 Press the  or  key to select [Backgrnd Density].
4 Press the OK key. Backgrnd Density appears.
5 Press the  or  key to select [Copy(Auto)] or
[Send/Box(Auto)].
6 Press the OK key. This displays the density
selection screen for the mode selected in step 5.
The screen shown is the one when [Copy(Auto)] is
selected.
7 Press the  or  key to select the density from [-
3 Lighter] to [+3 Darker].
8 Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
Sys. Menu/Count.: a b
; Document Box
< Edit Destination
*********************
[ Exit ]
= Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Backgrnd Density
[ Exit ]
1 Copy Denst. Adj.
Backgrnd Density: a b
*********************
2 Send/Box(Auto)
[ Exit ]
1 Copy(Auto)
Copy(Auto): a b
3 -1
*********************
5 +1
4 * 0 Normal