Utax P-C2665 MFP

Default Setting (System Menu)
8-139
8
4 Press the OK key. The Service Setting menu
appears.
5 Press the  or  key to select [MC].
6 Press the OK key. MC appears.
7 Press the  or  key to select [1] to [5].
8 Press the OK key. Completed. is displayed and the
screen returns to the Service Setting menu.
Mem.Diagnostics
Perform this function to check the machine memory.
Use the procedure below to set the Memory Diagnostics mode setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu
appears.
3 Press the  or  key to select [Service Setting].
4 Press the OK key. The Service Setting menu
appears.
Service Setting: a b
*********************
2 Network Status
3 Test Page
[ Exit ]
1 Service Status
MC: a b
1 1
2 2
********************* 3 *3
Sys. Menu/Count.: a b
; Document Box
< Edit Destination
*********************
[ Exit ]
= Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Backgrnd Density
[ Exit ]
1 Copy Denst. Adj.
Service Setting: a b
*********************
2 Network Status
3 Test Page
[ Exit ]
1 Service Status