Utax P-C2665 MFP

Management
11-9
11
1 See the procedure for displaying user control on
page 11-2
, and display the User/Job Account.
2 In the User/Job Account menu, press the  or 
key to select [User Login Set.].
3 Press the OK key. The User Login Set. menu
appears.
4 Press the  or  key to select [Local User List].
5 Press the OK key. Local User List appears.
The procedure differs depending on the details to
be edited.
Changing user information
1 Press the  or  key to select the user whose
information you want to change, and then press
the OK key.
2 In the same fashion as registering a new user,
press the  or  key to select the desired item,
press [Edit] (the Right Select key), change
information, and then press the OK key.
3 Repeat step 2 to change items as necessary.
4 After completing changing the user information,
press the OK key again.
User/Job Account: a b
*********************
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
1 User Login Set.
User Login Set.: a b
1 User Login
*********************
3 Group Auth.
[ Exit ]
2 Local User List
Local User List: a b
*********************
l Admin
l User1
[ Menu ]
l DeviceAdmin
Local User List: a b
l DeviceAdmin
*********************
l User1
[ Menu ]
l Admin
Detail: C b
User Name: 1/6
User1
[ Edit ]