Displays the System Menu/Counter menu screen,
where you can check the system settings and
counters.
Displays the Document Box screen, where you
can operate the document box and USB
memory.
Displays the Status screen, where you can
check the status, print a status report, and
pause or cancel the job in process.
Displays the Copy
screen, where you can
make settings required
for copying.
Displays the FAX screen,
where you can send a
FAX.*
Displays the Send screen, where
you can send an e-mail, folder
(SMB/FTP) or FAX*.
Used to register, call and delete
destinations to the one-touch key
numbers (1 to 22).
Shifts to switch the one-touch
key numbers (1 to 11 and 12 to
22).
Indicator is lit while shifted (12
to 22).
Displays the Address Book screen, where you can add, edit and delete destinations.
Calls the previous destination. Also used to enter a pause when entering a
FAX number.*
Displays the Add Destination screen, where you can add
destinations.
Switches between on-hook and off-hook when manually
sending a FAX.*
Message Display. Check what is
shown here while operating the
machine.
Selects the menu displayed
at the lower right in the
Message Display.
* Only on products with the fax function installed.
Selects the menu
displayed at the lower left
in the Message Display.
Blinks while print data
is being received or
data is transmitted.
Blinks while the
machine is accessing
the memory.
Selects auto color mode.
Selects full color mode.
Selects black and white mode.
To Next Page
Loading...
