Utax P-C2665 MFP

Default Setting (System Menu)
8-69
8
Copy Settings
The following settings are available for copying functions.
• Paper Selection
…8-69
• Auto Paper Selection …8-70
• Auto % Priority …8-71
• DP Read Action …8-72
• Select Key Set …8-73
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Paper Selection
Set the default paper selection. The table below shows the available settings.
Use the procedure below to set the default paper selection.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Copy].
2 Press the OK key. The Copy menu appears.
3 Press the  or  key to select [Paper Selection].
Item Description
Auto Automatically select the cassette
containing paper in the same size as
originals.
Def. PaperSource Select paper source set by Default Paper
Source (refer to page 8-22
).
Sys. Menu/Count.: a b
*********************
8 Printer
9 Send
[ Exit ]
7 Copy
Copy: a b
*********************
2 AutoPaperSelect.
3 Auto % Priority
[ Exit ]
1 Paper Selection