Utax P-C2665 MFP

Default Setting (System Menu)
8-36
Original Image (Send)
Set the default original document type for sending. The available default settings are shown below.
Use the procedure below to select the default quality setting for originals for sending.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the  or  key to select
[Orig.Image(Send)].
6 Press the OK key. Orig.Image(Send) appears.
Item Description
Text+Photo Text and photos together.
Photo For photos taken with a camera.
Text Only text, no photos.
for OCR Image quality suitable for OCR software.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Orig.Image(Send): a b
*********************
2 Photo
3 Text
1 *Text+Photo