Utax P-C2665 MFP User Manual

Default Setting (System Menu)
8-93
8
NOTE: If [On] has been selected, set the number of
days for storage as the [Period]. [Period] is only
displayed if it has been set to [On].
4 Press the OK key. The Period screen appears.
5 Enter the number of days for storage using the
numeric keys, the  or  key.
6 Press the OK key. The Detail menu screen
reappears.
Overwrite Set. (Setting of overwrite storage)
This setting is used to permit or prohibit the overwriting of old documents that have been stored for the storage
of new documents.
1 In the Detail menu screen, press the  or  key to
select [Overwrite Set.].
2 Press [Change] (the Right Select key). The
Overwrite Set. screen appears.
3 Press the  or  key to select [Permit] or
[Prohibit].
4 Press the OK key. The Detail menu screen
reappears.
Period: a b
(1 - 31)
/*7- day(s)
Detail: P b
Overwrite Set.: 8/9
Permit
[ Change ]
Overwrite Set.: a b
********************-
2 Prohibit
1 *Permit

Utax P-C2665 MFP Specifications

General

Brand	Utax
Model	P-C2665 MFP
Category	All in One Printer
Language	English