Utax P-C2665 MFP

Default Setting (System Menu)
8-98
Job Retention Deletion
The procedure for setting Job Retention Deletion is explained below.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Document Box].
2 Press the OK key. The Document Box menu
appears.
3 Press the  or  key to select [Job Box].
4 Press the OK key. The Job Box screen appears.
5 Press the  or  key to select [Job Ret. Deletion].
6 Press the OK key. The Job Retention Deletion
screen appears.
7 Press the  or  key to select the period that jobs
are retained.
8 Press the OK key. The Job Box screen reappears.
Sys. Menu/Count.: a b
*********************
< Edit Destination
= Adjust/Maint.
[ Exit ]
; Document Box
Document Box: a b
*********************
2 Sub Address Box
3 Job Box
[ Exit ]
1 Custom Box
Job Box: a b
*********************
2 JobRet. Deletion
[ Exit ]
1 Quick Copy Jobs
JobRet. Deletion: a b
*********************
2 1 hour
3 4 hours
1 *Off