Utax P-C2665 MFP User Manual

Default Setting (System Menu)
8-203
8
8 Press the OK key. AppleTalk appears.
9 Press the  or  key to select [On] or [Off].
10 Press the OK key. Completed. is displayed and the
screen returns to the Basic menu.
LAN Interface
Specify the settings for the LAN interface to be used. The default setting is Auto.
Use the procedure below to select the interface.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [Optional Network].
4 Press the OK key. The Optional Network screen
appears.
5 Press the  or  key to select [Basic].
AppleTalk: a b
*********************
2 On
1 *Off
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
Optional Network: a b
*********************
[ Exit ]
1 Basic

Utax P-C2665 MFP Specifications

General

Brand	Utax
Model	P-C2665 MFP
Category	All in One Printer
Language	English