Preparation before Use
2-25
2
2 Display the screen.
3 Click [Express Install].
NOTE: To install Status Monitor, it is necessary to
install Microsoft .NET Framework 4.0 beforehand.
4 You can also select [Use host name for port name]
and set to use the host name of the standard TCP/
IP port. (A USB connection cannot be used.)
NOTE:
The machine cannot be detected unless it is on.
If the computer fails to detect the machine, verify that it
is connected to the computer via a network or USB
cable and that it is turned on and click (Reload).
5 Select the package.
The following software will be installed.
• Driver Package
Printing System Driver, Status Monitor, Fonts
• Scan Package
TWAIN Driver
To Next Page
Loading...
