Vacon 100 INDUSTRIAL - Page 103

Table 35: I/f start parameters
Index Parameter Min Max Unit Default ID Description
P3.1.4.12.1 I/f Start 0 1 0 534
0 = Disabled
1 = Enabled
P3.1.4.12.2 I/f Start Frequency 5.0
0.5 *
P3.1.1.2
0.2 *
P3.1.1.2
535
P3.1.4.12.3 I/f Start Current 0.0 150.0 % 80.0 536
Table 36: Torque stabilator parameters
Index Parameter Min Max Unit Default ID Description
P3.1.4.13.1
Torque Stabilator
Gain
0.0 500.0 % 50.0 1412
P3.1.4.13.2
Torque Stabilator
Gain at Field Weak-
ening Point
0.0 500.0 % 50.0 1414
P3.1.4.13.3
Torque Stabilator
Damping Time Con-
stant
0.0005 1.0000 s 0.0050 1413
P3.1.4.13.4
Torque Stabilator
Damping Time Con-
stant for PM motors
0.0005 1.0000 s 0.0050 1735
P3.1.4.13.5
Torque Stabilator
Filter Time Constant
0.0000 0.5000 s 0.0005
1565
0
P3.1.4.13.6
Torque Stabilator
Filter Time Constant
for PM motors
0.0000 0.5000 s 0.0005
1565
1
PARAMETERS MENU VACON · 103
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
5