Table 89: Sleep function settings
Index Parameter Min Max Unit Default ID Description
P3.13.5.1 SP1 Sleep Frequency 0.00 320.00 Hz 0.00 1016
P3.13.5.2 SP1 Sleep Delay 0 300 s 0 1017
P3.13.5.3 SP1 Wake-up Level Varies 0.0000 1018
P3.13.5.4 SP1 Wake-up Mode 0 1 0 1019
0 = Absolute level
1 = Relative setpoint
P3.13.5.5 SP2 Sleep Frequency 0.00 320.00 Hz 0.00 1075 See P3.13.5.1.
P3.13.5.6 SP2 Sleep Delay 0 3000 s 0 1076 See P3.13.5.2.
P3.13.5.7 SP2 Wake-up Level Varies 0.0000 1077 See P3.13.5.3.
P3.13.5.8 SP2 Wake-up Mode 0 1 0 1020 See P3.13.5.4.
Table 90: Feedback supervision parameters
Index Parameter Min Max Unit Default ID Description
P3.13.6.1
Enable Feedback
Supervision
0 1 0 735
0 = Disabled
1 = Enabled
P3.13.6.2 Upper Limit Varies Varies Varies Varies 736
P3.13.6.3 Lower Limit Varies Varies Varies Varies 758
P3.13.6.4 Delay 0 30000 s 0 737
P3.13.6.5
Response to PID
Supervision Fault
0 3 2 749
0 = No action
1 = Alarm
2 = Fault (Stop accord-
ing to stop mode)
3 = Fault (Stop by
coasting)
VACON · 146 PARAMETERS MENU
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
To Next Page
Loading...
