Vacon 100 INDUSTRIAL - Page 227

Selection
number
Selection name Description
0 Binary coded
The mix of the inputs is binary coded. The different sets of
active digital inputs determine the preset frequency. See
more data in Table 123 The selection of preset frequencies
when P3.3.3.1 = Binary coded.
1 Number (of inputs used)
The number of active inputs tells which preset frequency is
used: 1, 2 or 3.
P3.3.3.2 PRESET FREQUENCY 0 (ID 180)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.3 PRESET FREQUENCY 1 (ID 105)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.4 PRESET FREQUENCY 2 (ID 106)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.5 PRESET FREQUENCY 3 (ID 126)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.6 PRESET FREQUENCY 4 (ID 127)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.7 PRESET FREQUENCY 5 (ID 128)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.8 PRESET FREQUENCY 6 (ID 129)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
PARAMETER DESCRIPTIONS VACON · 227
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
10