Vacon 100 INDUSTRIAL - Page 313

K1 K1.1 K2 K2.1 K3 K3.1
K1 K1.1 K2 K2.1 K3 K3.1
K1.1 K1
K2
K3 K2 K3 K3 K1 K3 K1 K2 K1
K2.1 K2
K1
K3.1 K3
K2
Mains
M1 M2 M3
from relay
Motor 2 controlMotor 1 control
from relay
Motor 3 control
from relay
Fig. 85: Selection 1
P3.15.4 AUTOCHANGE (ID 1027)
Use this parameter to enable or disable the rotation of the start sequence and the priority of
motors.
PARAMETER DESCRIPTIONS VACON · 313
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
10