vacon • 52 User interfaces
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Figure 19. Accessing Control page
Changing direction
Rotation direction of the motor can quickly be changed by applying the FUNCT button.
NOTE! Chang-
ing direction
command is not visible in the menu unless the selected control place is Local.
1. Anywhere in the menu structure, push the Funct button.
2. Push the Arrow up or the Arrow down button to select Change direction and confirm with the OK
button.
3. Then choose the direction you wish to run the motor to. The actual rotation direction is blinking.
Confirm with the OK button.
4. The rotation direction changes immediately and the arrow indication in the status field changes.
Quick edit
Through the
Quick edit functionality you can quickly access the desired parameter by entering the
parameter’s ID number.
1. Anywhere in the menu structure, push the FUNCT button.
2. Push the Arrow up or the Arrow down buttons to select Quick Edit and confirm with the OK but-
ton.
Main Menu
Parameters
( 15 )
Diagnostics
STOP READY I/O
ID: M1
( 7 )
Monitor
( 6 )
ID:
Choose action
STOP Ready Keypad
ID:1805
Local/Remote
Control page
Change direction
STOP READY Keypad
( 6 )
Keypad Reference
0.00 Hz
Output Frequency
0.00Hz
Motor Current
0.00A
Motor Torque
0.00%
0.00%
Motor Power
ID:184
Keypad
0.00 Hz
Output Frequency
0.00Hz
Motor Current
0.00A
Motor Torque
0.00%
0.00%
Motor Power
STOP READY Keypad
( 6 )
ID:168
Keypad Reference
0.00 Hz
Output Frequency
0.00Hz
Motor Current
0.00A
Motor Torque
0.00%
0.00%
Motor Power
FUNCT
OK
OK
OK
9162.emf
Main Menu
Parameters
( 15 )
Diagnostics
STOP READY I/O
ID: M1
( 7 )
Monitor
( 6 )
ID:
Choose action
RUN Ready Keypad
ID:1805
Local/Remote
Control page
Change direction
ID:
Choose action
RUN Ready Keypad
ID:1805
Forward
Reverse
Main Menu
Parameters
( 15 )
Diagnostics
STOP READY I/O
ID: M1
( 7 )
Monitor
( 6 )
FUNCT
OK OK
9163.ai
To Next Page
Loading...
