Vacon 20 - 9.9 Analogue outputs

parameter descriptions vacon
•
123
9
9.9 Analogue outputs (Control panel: Menu PAR -> P9)
9.1 A
NALOG OUTPUT SIGNAL SELECTION
0 = Not used
1 = Output frequency (0 - f
max
)
2 = Output current (0 - I
nMotor
)
3 = Motor torque (0 - T
nMotor
)
4 = PID output (0 - 100%)
5 = Frequency reference (0 - f
max
)
6 = Motor speed (0 - n
max
)
7 = Motor power (0 - P
nMotor
)
8 = Voltage (0 - U
nMotor
)
9 = DC-link Voltage (0 - 1000V)
10 = Process Data In1 (0 - 10000)
11 = Process Data In2 (0 - 10000)
12 = Process Data In3 (0 - 10000)
13 = Process Data In4 (0 - 10000)
14 = Test 100%
9.2 A
NALOG OUTPUT MINIMUM
0 = 0 V / 0 mA
1 = 2 V / 4 mA