Vacon 20 User Manual

1
1.Safety 1
1.1Warnings 1
1.2Safety instructions 3
1.3Earthing and earth fault protection 3
1.4Before running the motor 5
2.Receipt of delivery 7
2.1Type designation code 7
2.2Storage 7
2.3Maintenance 8
2.3.1Capacitor recharge 8
2.4Warranty 9
2.5Manufacturer’s declaration of conformity 10
3.Installation 11
3.1Mechanical installation 11
3.1.1Vacon 20 dimensions 15
3.1.2Cooling 19
3.1.3Power losses 20
3.1.4EMC levels 27
3.1.5Changing the EMC protection class from C2 or C3 to C4 28
3.2Cabling and connections 30
3.2.1Power cabling 30
3.2.2Control cabling 32
3.2.3Allowed option boards in Vacon20 36
3.2.4Screw of cables 38
3.2.5Cable and fuse specifications 40
3.2.6General cabling rules 43
3.2.7Stripping lengths of motor and mains cables 44
3.2.8Cable installation and the UL standards 44
3.2.9Cable and motor insulation checks 44
4.Commissioning 47
4.1Commissioning steps of Vacon 20 47
5.Fault tracing 49
6.Vacon 20 Application Interface 53
6.1Introduction 53
6.2Control I / O 55
7.Control panel 57
7.1General 57
7.2Display 57
7.3Keypad 58
Table of contents
Document: DPD00716E2
Release date: 08.03.2013
Software package: FW0107V008.vcx

Vacon 20 Specifications

General

Communication Options	Modbus, CANopen, PROFIBUS, Ethernet
Protection Class	IP20
Power Range	0.25 to 18.5 kW
Control Method	Scalar control, Vector control
Ambient Temperature	-10°C to +50°C