Vacon 20 User Manual

parameters vacon
•
83
8
P8.4 RO2 inversion 0 1 0 1588
0 = No inversion
1 = Inverted
P8.5 RO2 ON delay 0,00 320,00 s 0,00 460 0,00 = No delay
P8.6 RO2 OFF delay 0,00 320,00 s 0,00 461 0,00 = No delay
P8.7 RO1 inversion 0 1 0 1587
0 = No inversion
1 = Inverted
P8.8 RO1 ON delay 0,00 320,00 s 0,00 458 0,00 = No delay
P8.9 RO1 OFF delay 0,00 320,00 s 0,00 459 0,00 = No delay
P8.10
DOE1 signal
selection
0 Varies 0 317
As parameter 8.1, hidden
until an option board is con-
nected
P8.11
DOE2 signal
selection
0 Varies 0 318
As parameter 8.1, hidden
until an option board is con-
nected
P8.12
DOE3 signal
selection
0 Varies 0 1386
As parameter 8.1, hidden
until an option board is con-
nected
P8.13
DOE4 signal
selection
0 Varies 0 1390
As parameter 8.1, hidden
until an option board is con-
nected
P8.14
DOE5 signal
selection
0 Varies 0 1391
As parameter 8.1, hidden
until an option board is con-
nected
P8.15
DOE6 signal
selection
0 Varies 0 1395
As parameter 8.1, hidden
until an option board is con-
nected
Code Parameter Min Max Unit Default ID Selections
Table 8.9: Digital outputs

Vacon 20 Specifications

General

Communication Options	Modbus, CANopen, PROFIBUS, Ethernet
Protection Class	IP20
Power Range	0.25 to 18.5 kW
Control Method	Scalar control, Vector control
Ambient Temperature	-10°C to +50°C