Vacon NX series User Manual

Safety vacon • 5
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
1
1. SAFETY
This manual contains warnings and cautions, which are identified with safety symbols. The
warnings and cautions give important information on how to prevent injury and damage to the
equipment or your system.
Read the warnings and cautions carefully and obey their instructions.
The cautions and warnings are marked as follows:
Table 1. Warning signs
WARNING!
CAUTION!
CAUTION! Hot surface
9000.emf
13006.emf
9001.emf

Vacon NX series Specifications

General

Product type	AC Drive
Output voltage range	0-Uin
Frequency range	0-500 Hz
Enclosure classes	IP00, IP21
Mounting types	Wall
Braking chopper	Integrated or external
EMC filter	Built-in or external
Control modes	Scalar, Vector
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Communication options	Modbus, Profibus, CANopen, Ethernet
Ambient temperature range	-10°C to +50°C
Cooling method	Air-cooled