Basic Connections
The diagram below shows a basic live production setup.
Ensuring Compatibility
The camera controller may be unable to communicate with Vaddio cameras if their firmware is out of date.
When you set up the camera controller, be sure the associated Vaddio cameras have been updated to a
firmware version that supports the controller.
Powering Up
Connect the PoE+ power injector.
When you power up the PCC MatrixMIX for the first time, its directory will need to be populated with at
least one switcher, which manages the video and audio sources. This is part of the configuration process.
7
Integrator's Complete Guide to the PCC MatrixMIX Live Production Controller
To Next Page
Loading...