VADDIO PCC MatrixMIX - Changing the Switching Mode; Changing to Low-Power Mode (Standby)

Changing the Switching Mode
SETTINGS SCREEN, DEVICE TAB
On the Device tab of the Settings screen, select the desired switcher mode – A/B or Dual Bus.
After changing from A/B switching to dual-bus mode or vice-versa, the controller(s) associated with the
switcher may need to be rebooted.
Changing to Low-Power Mode (Standby)
SETTINGS SCREEN, DEVICE TAB
Note
On the Device tab of the Settings screen, select Standby. You may get a confirmation prompt.
When the controller is in standby, you can tap the touch-panel to return to normal operation.
38
Integrator's Complete Guide to the PCC MatrixMIX Live Production Controller