A Quick Look at the Camera Controller
The console provides quick, intuitive control of cameras and switcher functions.
Touch-Panel Display
Access to:
n Directory, for switcher selection
n Camera presets, scenes, and CCU settings
n Graphics keying and PIP
n Audio
n Macro recall
n Streaming sources
n Network information for the controller
n One-touch standby (controller and selected cameras)
Focus Knob
Switch between modes – auto-focus (illuminated blue) or manual (illuminated red). Adjusts the focus when
in manual mode.
Menu Knob
Navigate and select items from touch-panel screens and menus, adjust and save settings.
Pan, Tilt, and Zoom Speed Controls
The three speed control knobs above the joystick adjust the selected camera's speeds for pan, tilt, and
zoom. When you adjust any of these knobs, the touch-panel displays a slider to show the speed range.
4
Integrator's Complete Guide to the PCC MatrixMIX Live Production Controller
To Next Page
Loading...