Output parameter Output unit HMP3, 4, 5,
7, 8, and 9
MMP8 TMP1
Dew point temperature dierence °C
Absolute humidity at NTP
g/m
3
Water concentration in oil ppm
v
Relative saturation %RS
Water mass fraction ppm
w
2.4 Additional features with Indigo 200 series
transmitters
Connecting the probe to an Indigo transmitter provides a range of additional options for
outputs, measurement viewing, status monitoring, and configuration interface access.
Examples of additional features available with Indigo 200 series transmitters include:
• 3.5” TFT LCD color display or non-display model with LED indicator
• Digital output or 3 analog outputs (depending on the transmitter model)
• 2 configurable relays
• Wireless browser-based configuration interface for mobile devices and computers (IEEE
802.11 b/g/n WLAN)
The selection of available additional features (for example, output and connectivity options)
varies depending on the Indigo transmitter model. For more information on Indigo
transmitters, see www.vaisala.com/indigo.
2.5
Safety
When returning a product for calibration or repair, make sure it
has not been exposed to dangerous contamination, and is safe to handle
without special precautions.
WARNING!
Do not attempt to open the probe body. There are no user
serviceable parts inside the probe body.
CAUTION!
Do not touch the probe head with your bare hands. Touching will
deposit impurities on the probe head.
CAUTION!
Chapter 2 – Product overview
11
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:029-88186182 Web:www.xavery.cn Email:sxvery@163.com
To Next Page
Loading...
