MMP8 can also output ppm, the average mass concentration of water in oil. Vaisala has this
conversion readily available for specific oils, including mineral transformer oil. This allows
continuous measurement of ppm concentration in power transformer condition monitoring.
• Temperature measurement range −40 … +180 °C (−40 … +356 °F)
When installed with the ball valve kit, the MMP8 is ideal for installation into processes where
the probe needs to be installed or removed while the process is running. Probe installation
depth is adjustable. Pressure fitting options are ISO 1/2" and NPT 1/2". MMP8 is delivered with
a manual pressing handle that allows the probe to be pushed against process pressure.
For installation instructions of the ball valve see Attaching ball valve kit to process (page 20).
3.8 TMP1 probe
130 [5.12]
Ø 6
[0.24]
136 [5.35]
Ø 25
[0.98]
M12/5
Ø 3.2
[0.13]
mm
[in]
Probe cable
2 m [6.56 ft] or 10 m [32.8 ft]
Figure 12 TMP1 probe dimensions
Vaisala Temperature Probe TMP1 is designed for demanding temperature measurements in
industrial applications such as pharmaceutical industry and calibration laboratories, where
accuracy and robustness are essential.
• Temperature measurement range −70 … +180 °C (−94 … +356 °F)
• Operating temperature of probe body −40 … +80 °C (−40 … +176 °F)
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
24
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:029-88186182 Web:www.xavery.cn Email:sxvery@163.com
To Next Page
Loading...
