Vaisala Indigo 201 - Calibration Menu; General Settings; Figure 18 Calibration Menu (CO Probe Example, Desktop Browser)

4.3.2 Changing Administrator Password
To change the administrator password:
1. Connect to the wireless configuration interface and log in as an administrator (default
password: 12345). The user level (User or Admin) can be also changed by selecting the
user level icon in the upper right corner of any menu view.
2. Open the Settings > General menu.
3. In the User Access section, enter the new password (max. 25 characters) in the
Administrator Password
field.
4. The new password is saved when you tap or click outside the text field, and is in use at
the next login.
4.3.3
Resetting Administrator Password
If you have lost or forgotten the admininistrator password and cannot log in, you can reset
the password back to default (12345). Note that this requires powering the transmitter
o
and on.
To reset the password:
1. Power
o the transmitter.
2. Keep the wireless connection activation button on the bottom of the transmitter
pressed down.
3. While pressing the wireless connection activation button, power on the transmitter.
Keep the button pressed down until the transmitter start-up is complete (a
measurement is shown on the display). In the LED indicator model, the LED blinks
yellow when the password reset is complete.
4. The administrator password has now been reset to the default 12345.
Indigo 201 User Guide M211877EN-E
30