4.5.2 Status View: Analog Outputs
The Analog Outputs section of the Status menu shows information about the status of
Indigo's analog outputs 1-3.
• Output: The number of the analog output channel (1-3).
• Signal Level: The level of the analog output signal: shows the present measurement as
scaled in the analog output settings.
• Mode: The mode and range selected for the analog output (voltage, current or
o).
• Parameter: The measured parameter that is sent on the analog output channel.
More Information
‣
Analog Output Configuration Overview (page 45)
4.5.3
Status View: Relays
• Relay: relay A or relay B
• State: Shows whether the relay is active (set) or not.
• Mode: Relay activation mode (above or below a trigger level, or
o)
Indigo 201 User Guide M211877EN-E
34
To Next Page
Loading...
