7.3 Measurements Tab
The Measurements tab of the Calibration menu shows the current measurement data in
numeric format. The measurement data updates automatically at a 2-second interval.
The information shown in this tab is
probe-specific: the example here shows the
measurement information for a CO
2
probe.
Figure 30 Measurements Tab, CO
2
Probe Example
7.4
Diagnostics Tab
The Diagnostics tab of the Calibration menu contains status and diagnostics codes. When
carrying out diagnostics (for example, contacting Vaisala support), you can identify issues
by referring to this information.
In addition to the diagnostics information, this view also shows the environmental
compensation values that are currently in use. The status and compensation
fields are both
read-only.
The information shown on the diagnostics tab is probe-specific: the following figure shows
an example of the diagnostics tab information when using a CO
2
probe.
Chapter 7 – Calibration and Adjustment
59
To Next Page
Loading...
