Vaisala Indigo 201 - Page 40

• Brightness: set the brightness of the display (20%, 50%, 100% or o).
• Mode: Select whether the display shows the measurement information in graph or
numeric format.
Graph view settings:
• Parameter: Select which parameter's measurement is shown in the graph view.
• Unit: Select the unit that the measurement is shown in (for example, ppmCO
2
or %CO
2
).
• Rounding: Choose how many decimals of the measurement are shown in the numeric
reading shown alongside the graph view.
• Time Scale: Select the time period shown in the measurement graph (1 minute ... 6
hours).
Numeric view settings:
• Parameter (1-3): Select the measurement parameter or parameters shown in the
numeric view (up to 3 parameters can be shown simultaneously in the numeric view).
• Unit for Parameter (1-3): Select the unit the measurement is shown in (for example,
ppmCO
2
or %CO
2
).
• Rounding for Parameter (1-3): Choose how many decimals of the measurement are
shown in the numeric view.
More Information
‣
Display and LED Indicator (page 11)
‣
Graph Display Mode (page 12)
4.7.5
Factory Reset and Clearing Analog Output Settings
• Factory Reset: select this to restore the configuration of the transmitter to factory
default settings.
• Clear Analog Output Settings: this option removes the current analog output settings
from Indigo's memory. When you clear the analog output settings, Indigo automatically
adapts the analog output settings of the next probe you connect.
Indigo 201 User Guide M211877EN-E
38