Measurement (GMP251 Example)
Filtering factor Defines
how much past measurements aect the output
(measurement averaging over time). For details, see probe
documentation.
Temperature
compensation mode
Select whether the probe sensor's measurement or a manually
entered setpoint is used to set the temperature compensation.
Pressure/humidity/oxygen
compensation on/o
Enable or disable the environmental compensations.
Compensation Setpoints (GMP251 Example)
Enter the setpoint values for the environmental compensations that are in use (enabled in
the Measur
ement selections).
Chapter 4 – Wireless Configuration Interface
37
To Next Page
Loading...
