Vaisala Indigo 202 - Calibration and Adjustment; Calibration Overview

7. Calibration and Adjustment
7.1 Calibration Overview
The Calibr
ation menu of the wireless configuration interface contains options for calibrating
and adjusting the measurement of the probe you have connected to the transmitter. You can
also view the current adjustment and restore the probe's factory adjustments.
1
2
3 4
Figure 21 Calibration Menu Main View
1 Calibration tab
2 Configuration
tab
3 Diagnostics tab
4 Measurements tab
There are 4 tabs in the Calibr
ation menu:
• Calibration: the main adjustment view with options for making adjustments, viewing
adjustments, and restoring factory adjustments.
• Configuration
: options for using environmental compensations (probe-specific range
of options) that allow compensating for the conditions present in the calibration
environment, for example, pressure, temperature, and background gases. Also includes
probe-specific
configuration options that are not mandatory for use with Indigo.
• Diagnostics: this tab contains information about the status of the measurement and
the probe, and shows the current environmental compensation configuration.
• Measurements: this tab shows the current probe measurement in numeric format (use
this view, for example, when you need to follow measurement stablization in a
reference environment without leaving the Calibration menu).
Chapter 7 – Calibration and Adjustment
45