Vaisala Indigo 202 - Measurement and Diagnostics Tabs

7.3 Measurements Tab
The Measur
ements tab of the Calibration menu shows the current measurement data in
numeric format. The measurement data updates automatically at a 2-second interval.
The information shown in this tab is probe-specific: the example here shows the
measur
ement information for a CO
2
probe.
Figure 25 Measurements Tab, CO
2
Pr
obe Example
7.4 Diagnostics Tab
The Diagnostics tab of the Calibration menu contains status and diagnostics codes. When
carrying out diagnostics (for example, contacting Vaisala support), you can identify issues
by referring to this information.
In addition to the diagnostics information, this view also shows the environmental
compensation values that are currently in use. The status and compensation fields are both
r
ead-only.
The information shown on the diagnostics tab is probe-specific:
the following figure shows
an example of the diagnostics tab information when using a CO
2
probe.
Indigo 202 User Guide M211966EN-A
50