4.3
Logging in to Wireless Configuration
Interface
Figure 14 Indigo Login View
W
hen you open Indigo's wireless configuration interface in your browser, you are prompted
t
o log in. There are 2 available user levels:
• User: view-only access available for all users. Does not require a password.
• Admin: password-protected access. To change settings, you must log in as admin.
To log in:
1. Enter the user name and password:
a. To log in as user (view-only access, no configuration
rights), select User from the
User name dropdown. Leave the Password field empty.
b. To log in as admin (required for configuration), select Admin in the User name
dropdown and type the admin password (default: 12345) in the Password field.
2. Select L
og in after entering the login credentials. The wireless configuration interface
opens in the Measurements view.
The user level (User or A
dmin) is shown in the upper right corner of all menu views.
Select the user/admin icon in the upper right corner to change the user level.
More Information
‣
Changing User L
evel (page 25)
‣
Changing Administrator Password (page 25)
‣
Resetting Administrator Password (page 26)
Indigo 202 User Guide M211966EN-A
24
To Next Page
Loading...
