• Indigo S
tatus: shows the current status of the transmitter. Errors and notifications are
displayed here.
• Indigo Serial Number: the transmitter's serial number.
• WLAN Access Point Name: the network name (SSID) of the transmitter. Can be
configured in the Settings menu.
• WLAN MAC Address: unique hardware address of the unit. Cannot be changed.
• Probe: the type and serial number of the probe that is connected to Indigo.
More Information
‣
WLAN Settings (page 31)
4.5.2 Status View: Relays
• R
elay: relay A or relay B
• State: Shows whether the relay is active (set) or not.
• Mode: Relay activation mode (above or below a trigger level, or o)
• Parameter: The parameter that controls the relay
More Information
‣
Relay
Configuration Overview (page 41)
Chapter 4 – Wireless Configuration Interface
29
To Next Page
Loading...
