Compensation Setpoints and Power-Up Defaults
Figure 24 Compensation Setpoint and Power-Up Default Selection, CO
2
Pr
obe Example
Environmental compensations can have interdependencies: for example, accurate RH
measur
ement requires that also the temperature and pressure configuration match the
measurement environment. For more information on the environmental compensation
features of the connected probe, refer to the probe's documentation.
Note that the environmental compensations you set in the Se
ttings > Probe menu and the
compensations you set in the Calibration menu are interconnected: the configuration set in
either menu is applied to both.
More Information
‣
Probe Settings (page 36)
Chapter 7 – Calibration and Adjustment
49
To Next Page
Loading...
