3. In Transmitter > Software, select Choose file, and browse to the software update file.
4. Select Upload when the button becomes active.
Uploading takes some minutes.
5. Select Activate when the button becomes active.
The transmitter restarts. After the restart, you can see the updated software version under
System status.
If the transmitter's IP address is assigned via DHCP, the transmitter may get a new
IP address upon restarting. To continue using the web interface, reconnect using
the transmitter's new IP address.
More information
‣
Connecting to web interface (page 39)
‣
Logging in to web interface (page 42)
Chapter 9 – Maintenance and troubleshooting
65
To Next Page
Loading...
