3. All output parameters from the connected probe are shown in the list. If you have two
probes connected, use the arrow buttons to switch between the lists showing the
parameters from each probe. Press to select a parameter and exit the list view.
4. Set values for Activation and Limit of the alarm.
5. Select Turn alarm on to activate the alarm.
6. A notification is shown and sounded when the alarm is activated.
7. Select OK to turn o the alarm.
To turn o an alarm that has not yet activated, select Set alarm in the shortcut menu and
select Turn alarm o.
Indigo80 User Guide M212722EN-B
20
To Next Page
Loading...
