VAMP 257 - Non-Volatile Memory Contents

VAMP 257 Feeder and motor manager
Technical description
VAMP Ltd
104
VAMP 24h support phone : +358 (0)20 753 3264
VM257.EN002
Setting parameters of timers:
Parameter Value Unit Default Description
On hh:mm:ss - 07:00:00 Activation time of the timer
Off hh:mm:ss - 16:00:00
De-activation time of the
timer
For each four timers there
are 12 different modes
available:
-; - -
The timer is off and not
running. The output is
off i.e. 0 all the time.
Daily;
The timer switches on and off
once every day.
Monday;
The timer switches on and off
every Monday.
Tuesday;
The timer switches on and off
every Tuesday.
Wednesday;
The timer switches on and off
every Wednesday.
Thursday;
The timer switches on and off
every Thursday.
Friday;
The timer switches on and off
every Friday.
Saturday;
The timer switches on and off
every Saturday.
Sunday;
The timer switches on and off
every Sunday.
MTWTF;
The timer switches on and off
every day except Saturdays
and Sundays
MTWTFS;
The timer switches on and off
every day except Sundays.
Mode
SatSun;
The timer switches on and off
every Saturday and Sunday.
SagOn On; Off - On Sag on event
SagOff On; Off - On Sag off event
SwelOn On; Off - On Swell on event
SwelOf On; Off - On Swell off event
2.11. Non-volatile memory
There is a non-volatile memory for the following data :
• Disturbance recordings
• Events
• States at LEDS
• Blackout data
The contents of the non-volatile memory is not lost even if there
is max. 1day failure in the auxiliary power supply.