VAMP 257 - Blocking and Interlockings Configuration

VAMP 257 Feeder and motor manager
Operation and configuration
VAMP Ltd
38
VAMP 24h support phone +358 (0)20 753 3264 VM257.EN002
5.10. Blocking and interlockings
configuration
The configuration of the blockings and interlockings is done
with the VAMPSET software. Any start or trip signal can be
used for blocking the operation of any protection stage.
Furthermore, the interlocking between objects can be
configured in the same blocking matrix of the VAMPSET
software. For more information, please refer to the VAMPSET
manual (VMV.EN0xx).
NOTE! Interlocking object 7 and 8 are not possible.