VAMP 257 - User Interface; General User Interface; Manager Front Panel Overview

VAMP 257 Feeder and motor manager
Operation and configuration
VAMP Ltd
8
VAMP 24h support phone +358 (0)20 753 3264 VM257.EN002
2. User interface
2.1. General
The manager can be controlled in three ways:
• Locally with the push-buttons on the manager front panel
• Locally using a PC connected to the serial port on the front
panel or on the rear panel of the manager (both cannot be
used simultaneously)
• Via remote control over the remote control port on the
manager rear panel.
2.2. Manager front panel
The figure below shows, as an example, the front panel of the
feeder manager VAMP 257 and the location of the user
interface elements used for local control.
VY 062 B
Power
Error
Com
Alarm
Trip
A
B
C
Feeder Manager
1
3
2
4
VAMP 257
VAMP257Front
Figure 2.2-1. Manager front panel (Example VAMP 257)
1. LCD dot matrix display
2. Keypad
3. LED indicators
4. RS 232 serial communication port for PC