VAMP 257 - Ordering Codes for VAMP Feeder Managers

VAMP 257 Feeder and motor manager
Technical description
VAMP Ltd
150
VAMP 24h support phone : +358 (0)20 753 3264
VM257.EN002
7.1. Ordering codes of VAMP feeder
managers
VAMP FEEDER MANAGER ORDER CODES
VAMP 257
-3
Nominal current [A]
3 =1A / 5A
Nominal earth-fault current Io1 & Io2 [A]
C =1A / 5A
D = 0.2A / 1A
Additional I/O (X8 terminal)
6 =None
7 = 8 inputs and 4 outputs
8 = 10 outputs
9
= for future purposes
Supply voltage [V]
A = 40.. 265Vac/dc
B = 18.. 36Vdc
C
= 40.. 265Vac/dc + ARC Protection
D = 18.. 36Vdc + ARC Protection
E = 40.. 265Vac/dc + DI19, DI20 Optional
F = 18.. 36Vdc + DI19, DI20 Optional
Optional hardware (communication port 1)
A = TTL/RS-232
B = Plastic/Plastic fibre interface (VCM fiber PP)
C = N/A
D = RS 485 Interface (VCM 485-4)
E = Glass/Glass Optic Interface (VCM fiber GG)
F = Plastic/Glass Optic Interface (VCM fiber PG)
G
= Glass/Plastic Optic Interface (VCM fiber GP)
H = RJ-45 connection (Ethernet, VCM TCP)
I = RJ-45 connection (RS-232, VCM 232)
Optional hardware (communication port 2)
A =None
B = RJ-45 connection (Ethernet, VCM TCP)
C = RJ-45 connection (RS-232, VCM 232)
D = RS-485 Interface (VCM 485-2)
Accessories :
Order Code Explanation Note
VEA 3 CG Ethernet Interface Module VAMP Ltd
VPA 3 CG Profibus Interface Module VAMP Ltd
VSE001 Fiber optic Interface Module VAMP Ltd
VSE002 RS485 Interface Module VAMP Ltd
VX003-3 Programming Cable (VAMPSet, VEA 3 CG+200serie) Cable length 3m
VX004-M3 TTL/RS232 Converter Cable (for PLC, VEA3CG+200serie ) Cable length 3m
VX007-F3 TTL/RS232 Converter Cable (for VPA 3 CG or VMA 3 CG) Cable length 3m
VX015-3
TTL/RS232 Converter Cable (for 100serie+VEA3CG) Cable length 3m
VA 1 DA-6 Arc Sensor Cable length 6m
VYX076 Raising Frame for 200-serie Height 40mm
VYX077 Raising Frame for 200-serie Height 60mm
= will be available 2007