VAMP 257 - Operating Levels and Access

VAMP 257 Feeder and motor manager
Operation and configuration
VAMP Ltd
18
VAMP 24h support phone +358 (0)20 753 3264 VM257.EN002
3.4. Operating levels
The manager has three operating levels: User level , Operator
level and Configuration level . The purpose of the operating
levels is to prevent accidental change of manager
configurations, parameters or settings.
USER level
Use:
Possible to read e.g. parameter values,
measurements and events
Opening: Level permanently open
Closing: Closing not possible
OPERATOR level
Use:
Possible to control objects and to change e.g.
the settings of the protection stages
Opening: Default password 0001
Setting state: Push ENTER
Closing:
The level is automatically closed after 10
minutes idle time. Giving the password 9999
can also close the level.
CONFIGURATION level
Use:
The configuration level is needed during the
commissioning of the manager. E.g. the
scaling of the voltage and current
transformers can be set.
Opening: Default password 0002
Setting state: Push ENTER
Closing:
The level is automatically closed after 10
minutes idle time. Giving the password 9999
can also close the level.