VAMP 257 - Configuration Menu (CONF) Options

VAMP 257 Feeder and motor manager
Operation and configuration
VAMP Ltd
34
VAMP 24h support phone +358 (0)20 753 3264 VM257.EN002
5.7. Configuration menu CONF
The following functions and features can be read and set via
the submenus of the configuration menu:
DEVICE SETUP
• Transfer rate of local serial bus (bit/s)
• “AccessLevel” display (Acc)
LANGUAGE
• List of available languages in the relay
CURRENT SCALING
• Rated phase CT primary current (Inom)
• Rated phase CT secondary current (Isec)
• Rated I
0
CT primary current (Ionom)
• Rated I
0
CT secondary current (Iosec)
• The rated current of the Io current input (Ioinp)
• Rated I
02
CT primary current (Io2nom)
• Rated I
02
CT secondary current (Io2sec)
• The rated current of the I
02
current input (Io2inp)
MOTOR CURRENT
• Rated current of the motor
VOLTAGE SCALING
• Rated VT primary voltage (Uprim)
• Rated VT secondary voltage (Usec)
• Rated U
0
VT secondary voltage (Uosec)
• Voltage measuring mode (Umode) *
DEVICE INFO (only display)
• Manager type (Type VAMP 2XX)
• Serial number (SerN)
• Software version (PrgVer)
• Bootcode version (BootVer)
DATE/TIME SETUP
• Date (Dat)
• Time (Time)
• Date information format (Style)